- Before installation, please back up your data in original HDD
- Power down the PC System
- Remove the system external cover and the original HDD
- Take parts from package
PARTS:
a. 3.5" bracket x 1
b. M3 flat head screw x 4
c. 6/32" pan head screw x 4
Secure the SSD onto 3.5" bracket with M3 flat head screws
Fit the SSD into 3.5 inch drive bay
Secure the SSD with 6/32" pan head screws
Connect SATA power cable.
Connect SATA data cable.
Close the case and reconnect the system power.
Power on the system and choose boot from CD.
Then install OS from CD.
Intallation completes as the new disk appears.
- Before installation, please back up your data
in original HDD
- Power down the PC System
Remove the cover on the back of notebook.
Remove the original HDD.
Fit the SSD onto the system.
Secure the cover.
Reconnect the system power.
Power on the system and choose boot from CD.
Then install OS from CD.
Intallation completes as the new disk appears.